The shackle
- Hardened or boron alloy steel resists cutting better than a soft, thin shackle.
- Thickness matters. Our heavy locks run from 5/16 in. up to 7/16 in. shackles.
Looking for car keys or key fobs? Visit Spare Me Car Keys →
Padlocks
Some locks only need to keep a shed door shut. Others guard a conex box full of tools, a shop full of equipment, or a gate miles from the nearest house. For those jobs, it pays to know what makes a padlock "high security" and which features are worth paying for. Here is a plain-English guide from your local Fremont County locksmith, using the specs from the padlocks we carry in Riverton.
Not sure which lock you need?
Tell us what you are locking up (a container, trailer door, shop, gate, or chain), send a photo of the hasp if you can, and let us know if you want it on a key you already carry.
Call or text 307-206-4218.
There is no single feature. A lock is only as strong as its weakest part, so look at all four of these before you buy.
These are the top-tier ("Best") locks from our padlocks page. Specs come from the manufacturers. Prices are per lock.
Our price: $86.00
Solid brass, chrome plated, with a 5/16 in. case-hardened boron steel shackle and ABLOY's rotating-disc cylinder (no springs or pins). Rated EN 12320 Grade 3 in the 25 and 50 mm shackle versions. The key comes out only when the lock is locked.
Our price: $86.00
A bigger ABLOY: 2-1/4 in. solid brass body, chrome plated, with a 10 mm (25/64 in.) case-hardened boron steel shackle and the same rotating-disc cylinder. A good fit for trailers, containers, gates, and storage doors.
Our price: $89.00
Our top-end padlock. Hardened alloy steel body and a 7/16 in. hardened alloy steel shackle, black GRANIT coating, and an ABUS-Plus disk cylinder that can be rekeyed to match an existing key. Made in Germany to meet European standard EN 12320.
Our price: $69.00
Solid brass with a hardened steel jacket and a low, short 10 mm shackle that leaves little room for cutters. The cylinder is drill and pull resistant. Made for roll-up doors, roller shutters, and gates where the lock has to fit a tight spot (ABUS security level 7).
Our price: $72.00
Stainless steel inside and out, with a round body that covers most of the shackle, an ABUS-Plus disc cylinder, and a cover against dirt and water spray. ABUS security level 9. Pair it with a Diskus hasp so the shackle is covered.
Our price: $89.00
Hardened steel body, 2-1/8 in. wide, with a closed (guarded) 7/16 in. shackle and NANO PROTECT coating. Rekeyable cylinder. ABUS security level 9. We can key it to match your Schlage SC1 key.
Our price: $59.00
Made in the USA. A shrouded solid steel body with a 5/16 in. hardened boron alloy shackle and a rekeyable 5-pin cylinder. The steel shroud guards the shackle on ranch gates, job trailers, and equipment containers.
Our price: $50.00
A 2-1/2 in. solid steel body with the thickest shackle we carry: 7/16 in. hardened boron alloy. Our A702KA locks are keyed alike, so one key opens all of them, and the cylinder is rekeyable.
Our price: $86.00
Solid brass commercial padlock with a 5/16 in. molybdenum hardened steel shackle that locks on both legs. The 6-pin Schlage C keyway lets us key it to match your doors or master key system. Schlage says it meets or exceeds ASTM standards for shackle strength, cutting, and corrosion.
30-day returns. Return a padlock to us in Riverton within 30 days of pickup. See our return policy.
Most padlocks use a pin tumbler cylinder: small spring-loaded pins that line up when the right key goes in. A disc cylinder works differently. ABLOY's cylinder uses rotating discs instead of pins and springs, and ABLOY describes it as extremely pick resistant and built to work in severe climates. ABUS uses its own disc cylinder on the GRANIT 37RK/55 and the Diskus 20/70.
Pin tumbler locks still have their place. They are easy for us to rekey, they can be keyed alike, and good ones like the American Lock A5300 and A702KA use solid steel bodies and boron shackles. If you need the lock on the same key as other padlocks on the property, a rekeyable pin tumbler lock may be the better fit.
We are not naming brands to knock. Plenty of low-cost locks are fine for a gym locker or a toolbox in the garage. The difference shows up in parts you can see and measure:
Basic locks often have a thin, fully exposed shackle. Our high-security picks use 5/16 in. to 7/16 in. hardened or boron steel, and many are shrouded or disc-shaped.
A basic lock usually comes with a simple cylinder that can't be rekeyed. Our high-security locks use disc cylinders or rekeyable cylinders we can service.
When you buy from us, a local locksmith helps you pick the lock, can rekey or key it alike, and can help you set up the hasp it goes on.
A heavy lock on a thin hasp is a mismatch. The hasp, the screws or bolts holding it, and the door it is mounted on all have to hold up too. Disc and hidden-shackle locks also need a hasp shaped to fit them. ABUS, for example, recommends pairing the Diskus 20/70 with a Diskus hasp. Send us a photo of what you have and we'll tell you whether your current hasp is a good match. See trailer security and shed security for more on hasps and doors.
A high-security lock does less good if spare keys float around. Ways we can help:
For businesses, our commercial locksmith page covers door hardware and master key systems. Ranches can see ranch and farm locksmith.
Call or text 307-206-4218 with what you are locking and a photo of the hasp or chain.
We'll go over the options and whether you want it keyed alike or matched to a key you carry.
We'll set up a pickup time and place in Riverton, or ship it for a $10 flat rate.
Spare Me Locksmith Services is a mobile-only locksmith based in Riverton, serving Riverton, Lander, Dubois, Shoshoni, and the rest of Fremont County. Fully insured, 100% satisfaction guaranteed, and an ALOA Security Professionals Association member #AR125851. Our hours are Monday through Friday from 8 AM and Saturday 9 AM to 2 PM; we are closed Sunday.
Frequently asked questions
Look at four things: a hardened or boron steel shackle of good thickness, a solid steel, hardened steel, or steel-jacketed body, a cylinder that is hard to pick (such as a disc cylinder), and how much shackle is exposed to bolt cutters. Our high-security padlocks have 5/16 in. to 7/16 in. hardened or boron steel shackles, and many are shrouded or disc-shaped.
From us. Spare Me Locksmith Services carries ABLOY, ABUS, American Lock, and Schlage high-security padlocks in Riverton. Call or text 307-206-4218 and we'll set up a pickup in Riverton, or ship it for a $10 flat rate.
If you need a lock that is very hard to pick and works in harsh weather, they are a strong choice. ABLOY's cylinder uses rotating discs instead of pins and springs, and ABLOY describes it as extremely pick resistant and built for severe climates. Our ABLOY PL330 and 341 Enforcer are each $86.
Our top-end lock is the ABUS GRANIT 37RK/55 at $89. It has a hardened alloy steel body, a 7/16 in. hardened alloy steel shackle, and an ABUS-Plus disk cylinder, and it is made to meet European standard EN 12320.
Often, yes. The GRANIT 37RK/55, American Lock A5300, and A702KA have rekeyable cylinders, and the Schlage KS23F2300 can be keyed to match your Schlage C door locks or master key system. Tell us which keys you carry now.
Yes. Return a padlock to us in Riverton within 30 days of pickup. See our return policy for details.
We are a mobile-only locksmith based in Riverton, serving Riverton, Lander, Dubois, Shoshoni, and the rest of Fremont County. Our hours are Monday through Friday from 8 AM and Saturday 9 AM to 2 PM; we are closed Sunday.
Contact us
Tell us what you are locking and we'll help you pick the right high-security padlock, key it the way you want, and set up a pickup in Riverton. Call or text 307-206-4218.
ALOA Security Professionals Association member #AR125851
Get a quote
Tell us what you need and we will get back to you. Or call or text 307-206-4218.