Looking for car keys or key fobs? Visit Spare Me Car Keys →

Padlocks

What Size Padlock Do I Need? A Shackle Size Guide for Riverton

You found a padlock you like, but will it fit the hasp on your shed, the chain on your gate, or the latch on your trailer? A padlock that is too thick won't go through the hole, and one with too little room inside the shackle won't close around the hardware. Here is a plain-English guide from your local Riverton locksmith on the three numbers that decide whether a padlock fits, how to measure what you're locking, and the sizes we carry.

Not sure what size you need?

Send us a photo of the hasp, chain, or latch with a tape measure next to it, and tell us what you're locking up. We'll tell you which of our padlocks fit.

Call or text 307-206-4218.

The three numbers that decide whether a padlock fits

The size printed on a padlock package is usually the body width. That number tells you how big the lock looks, but it doesn't tell you whether it will fit. These three numbers do:

Shackle diameter

How thick the U-shaped shackle is. It has to pass through the hole in your hasp, staple, or chain link. Thicker shackles are harder to cut, but only if they fit through the hole.

Vertical clearance

The open space from the top of the lock body to the inside of the shackle when it's closed. It has to be taller than everything the shackle wraps around: the staple, the hasp plate, or the chain link.

Horizontal clearance

The space between the two legs of the shackle. Wide hardware, like a thick gate eye or a heavy chain link, needs more room side to side.

Body width matters too, but in a different way. The lock body needs room to hang without hitting the door frame, the trailer wall, or the gate post, and you need room to get a key in and turn it.

How to measure what you're locking

Measure the hardware first, then pick a lock to match it. A tape measure works for most jobs. Measure with everything closed the way it will be when it's locked.

Hasp on a shed or trailer door

  1. Close the hasp over the staple (the loop the lock goes through).
  2. Measure the inside of the staple opening. The shackle has to be thinner than this.
  3. Measure how thick the staple is. The lock's vertical clearance has to be more than this.

Chain on a gate

  1. Pull the chain tight the way you'll lock it.
  2. Measure the inside of the link the shackle goes through.
  3. Count how many links the shackle has to hold. Two links stacked together need more clearance than one.

Gate latch or locking tab

  1. Close the gate and line up the holes in the latch.
  2. Measure the smallest hole the shackle has to pass through.
  3. Measure the total thickness of the tabs stacked together. That's the clearance you need.

Storage unit latch

  1. Measure the hole in the latch and how thick the latch is.
  2. Check how much room there is around the latch for the lock body.
  3. See our guide to storage unit padlocks for disc and shrouded locks.

A few measuring tips

  • Leave a little room. If a hole measures exactly 3/8 in., a 3/8 in. shackle may bind or not go in at all once paint, rust, or a little sag in the gate gets involved. Pick a shackle a bit thinner than the hole.
  • Measure the narrowest spot. Hasps and chain links are not always even. Measure where the opening is smallest.
  • Think about winter. Ice and packed snow can build up on a gate latch. A lock that only just closes in October can be a fight in January.
  • Take two photos. One straight on and one from the side, each with a tape measure in the picture. Text them to us and we'll help you match a lock.

Pick the shortest shackle that fits

It's tempting to buy the biggest lock or the longest shackle so it fits anything. The trouble is that extra shackle sticking up above the hardware gives bolt cutters and pry bars something to grab. A lock that sits snug against the hasp, with just enough clearance to close, leaves the least exposed steel.

Long shackles still have their place. A gate chain, a thick hasp, or two links stacked together can need more reach than a standard shackle has. In those spots, a long-shackle padlock is the right tool, and a lock that fits is better than one that won't close. Just don't pick the long version when the standard one fits.

Padlock size chart: locks we carry in Riverton

Here are the sizes of padlocks on our padlocks page, sorted from the tightest fit to the longest reach. Specs come from the manufacturers and the product cards on that page. Prices are per lock.

PadlockShackle diameterClearance or shackle reachBody widthOur price
ABUS 92/65 Monobloc brass padlock with steel jacket25/64 in. (10 mm)35/64 in. vertical2-5/8 in. (65 mm)$69.00
Master Lock M40XT Magnum stainless steel discus padlock3/8 in. octagonal5/8 in., fully shrouded2-3/4 in. (70 mm)$27.00
ABUS Diskus 24/70 stainless steel disc padlock25/64 in. (10 mm)43/64 in. vertical2-3/4 in. (70 mm)$45.00
SQUIRE Mercury 50CS closed-shackle padlock0.38 in. (9.5 mm)0.83 in. vertical / 0.90 in. horizontal2.16 in. (55 mm)$36.00
American Lock Series 30 padlock1/4 in.1 in.1-1/2 in.$27.00
ABUS 83CS/45 brass padlock, Schlage C keyway5/16 in.1 in. vertical1-3/4 in.$72.00
ABUS GRANIT 37RK/55 high security padlock7/16 in.1-1/16 in. vertical / 1-1/16 in. horizontal2-7/16 in.$89.00
American Lock A702KA solid steel padlock, keyed alike7/16 in.1-1/16 in.2-1/2 in.$50.00
American Lock Series 1205 solid aluminum padlock5/16 in.1-1/8 in.1-3/4 in.$27.00
Master Lock 6121 ProSeries Weather Tough padlock5/16 in.1-1/8 in.2-1/8 in.$30.00
American Lock A5300 shrouded solid steel padlock5/16 in.1-1/8 in.1-3/4 in.$59.00
ABUS 72/40HB40 blue aluminum padlock1/4 in.~1-1/2 in. clearance, 3/4 in. horizontal1-1/2 in.$32.00
ABUS 83AL/40 blue aluminum padlock1/4 in.1-1/2 in. vertical1-1/2 in.$45.00
Schlage KS23F2300 commercial brass padlock5/16 in.2 in.1-25/32 in.$86.00
American Lock A5202 long-shackle padlock5/16 in.3 in. tall shackle1-3/4 in.$36.00
ABUS 83AL/40HB75 blue aluminum padlock, Schlage C keyway1/4 in.extended 3 in. (HB75) shackle1-1/2 in.$45.00

Some of these, like the Master Lock M40XT and ABUS Diskus, are disc locks with the shackle mostly covered, and the ABUS GRANIT is a high-security lock. See our guide to high-security padlocks for more on those. If the size you need isn't on the chart, call or text us and we'll help you find one that fits.

Six padlocks for different size jobs

These six cover most of the hardware we see around Fremont County, from tight hasps to gate chains.

ABUS 92/65 Monobloc brass padlock with a hardened steel jacket

ABUS 92/65 Monobloc padlock: for tight hasps

Our price: $69.00

Solid brass body with a hardened steel jacket, 2-5/8 in. (65 mm) wide. 25/64 in. (10 mm) hardened special steel shackle with only 35/64 in. vertical clearance, so very little shackle shows. Precision pin tumbler cylinder; drill and pull resistant.

Master Lock 6121 ProSeries laminated steel padlock with a Weather Tough cover

Master Lock 6121 ProSeries: a standard shed or trailer hasp

Our price: $30.00

Laminated steel body, 2-1/8 in. wide, with a Weather Tough cover. 5/16 in. hardened boron alloy shackle with 1-1/8 in. clearance. Rekeyable 5-pin cylinder with spool pins. Keyed different.

American Lock A702KA solid steel padlock

American Lock A702KA: a heavy hasp with a big hole

Our price: $50.00

Solid steel body, 2-1/2 in. wide, zinc plated. 7/16 in. hardened boron alloy shackle with 1-1/16 in. clearance, the thickest shackle in the American Lock line we carry. Rekeyable 5-pin cylinder. Keyed alike.

ABUS 72/40HB40 blue aluminum long-shackle padlock

ABUS 72/40HB40: a little extra reach

Our price: $32.00

Anodized aluminum body, 1-1/2 in. wide. 1/4 in. hardened steel shackle with about 1-1/2 in. clearance and 3/4 in. horizontal. Precision 6-pin cylinder that can be rekeyed to match an existing key. Keyed alike, and it locks by pushing the shackle down.

Schlage KS23F2300 commercial brass padlock with a 2 in. shackle

Schlage KS23F2300: 2 in. of clearance on Schlage keys

Our price: $86.00

Solid brass body, 1-25/32 in. wide. 5/16 in. molybdenum hardened steel shackle with 2 in. clearance; both shackle legs lock. 6-pin Schlage C keyway, so we can key it to match your doors.

American Lock A5202 solid steel long-shackle padlock

American Lock A5202: gate chains and thick hasps

Our price: $36.00

Solid steel body, 1-3/4 in. wide, chrome plated. 5/16 in. hardened boron alloy shackle, 3 in. tall, to reach around chain and thick hasps. Rekeyable 5-pin cylinder.

30-day returns with local pickup in Riverton. Return a padlock to us in Riverton within 30 days of pickup, unused and with all its keys and packaging. See our return policy. That's one more reason to send us a photo first, so you get the right size the first time.

How these compare to a typical $10 hardware-store padlock

A low-cost padlock is fine for a gym locker or a toolbox in the garage. If you're comparing one to the locks above, look past the body size on the package and check the numbers that matter for fit and strength:

  • Shackle diameter and material. Every lock above lists its shackle thickness and what it's made of, like hardened steel or boron alloy.
  • Clearance. If the package doesn't list it, you're guessing whether it will close around your hardware.
  • Body material. Aluminum bodies don't rust, and solid steel bodies like the American Lock Series 5200 are made to resist cutting and sawing. Pick what suits the spot, indoors or out in the wind and snow.
  • Rekeyable cylinder. Many of our padlocks can be rekeyed later, so a lost key doesn't mean a new lock.

Different sizes, one key

You might need a long-shackle lock for the gate chain, a standard lock for the shed, and a heavy one for the trailer. They don't all have to be on different keys. The American Lock A702KA and ABUS 72/40 come keyed alike, and rekeyable models like the American Lock Series 1205, A702, Series 5200 (including the long-shackle A5202), and A5300 and the Master Lock 6121 ProSeries can be set up keyed alike. Tell us which locks you want on one key and we'll tell you what can be done. For more, see our guides to combination vs. keyed padlocks and rekeying and lock changes.

When the hardware is the problem

Sometimes no padlock fits well because the hasp is thin, bent, or held on with short screws a pry bar can pull out. A padlock is only as strong as what it's locked to. If you're putting new hardware on a trailer, van, or storage door, a hidden-shackle set like the American Lock A800LHC hasp and A2010 padlock (our price $69.00) covers the shackle so bolt cutters can't grab it, and we can install it for you. See our guides to shed security and trailer security for more.

What to tell us when you call or text

  • What you're locking: shed, gate, trailer, job box, or something else.
  • Photos of the hasp, chain, or latch with a tape measure next to it.
  • Whether the lock sits indoors or out in the weather.
  • How many locks you need, and whether they should share a key.

Spare Me Locksmith Services is a mobile-only locksmith based in Riverton, serving Riverton, Lander, Dubois, Shoshoni, Hudson, Pavillion, and the rest of Fremont County. Fully insured, 100% satisfaction guaranteed, and an ALOA Security Professionals Association member #AR125851. Our hours are Monday through Friday from 8 AM and Saturday 9 AM to 2 PM; we are closed Sunday.

Frequently asked questions

Padlock size FAQ for Riverton & Fremont County

Measure the inside of the staple, the loop the lock goes through, and pick a shackle a little thinner than that. Then check that the lock's clearance is more than the thickness of the staple. The American Lock Series 1205 and Master Lock 6121 ProSeries, both with a 5/16 in. shackle and 1-1/8 in. clearance, are a good place to start, but measure your hasp first or send us a photo with a tape measure next to it.

Shackle diameter is the thickness of the metal loop. Measure across one leg of the shackle on a straight section. Vertical clearance is the space from the top of the lock body to the inside of the closed shackle. Horizontal clearance is the space between the two legs.

Clearance is the open space inside the closed shackle. It has to be bigger than whatever the shackle wraps around, like a hasp staple, a gate latch, or a chain link. Most padlock specs list vertical clearance, and some also list horizontal clearance.

A thicker shackle is harder to cut, but only if it fits through the hole in your hardware. A shackle that is too thick won't go in at all. Pick the thickest shackle that fits with a little room to spare, and the shortest clearance that still closes around the hardware.

It depends on the chain. Measure the inside of the link and count how many links the shackle has to hold. Two links together often need a long-shackle lock, like the American Lock A5202 with its 3 in. shackle. Send us a photo of the chain with a tape measure next to it and we'll help you choose.

Often, yes. Several of our padlocks have rekeyable cylinders, so a long-shackle lock for the gate and a standard lock for the shed can be set up to open with one key. Some locks stay on their own key. Tell us which locks you want on one key and we'll tell you what can be done.

Yes. Return a padlock to us in Riverton within 30 days of pickup, unused and with all its keys and packaging. See our return policy for details.

Contact us

Need a padlock that fits?

Send us a photo of your hasp, chain, or latch with a tape measure next to it. We'll help you pick a padlock that fits and holds up to Wyoming weather. Call or text 307-206-4218.

ALOA Security Professionals Association member #AR125851

ALOA Security Professionals Association member #AR125851

Get a quote

Request a locksmith quote

Tell us what you need and we will get back to you. Or call or text 307-206-4218.